View 280105-04_4248216.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

APD-256M025A-1
Vishay Dale
Plasma Panel Display Modules
256 Character Display with Drive Electronics Controller, Parallel and Serial Interface
FEATURES
* 256 (8 x 32) alphanumeric characters (5 x 7 dot matrix) * Only + 5 and + 12 VDC required * 256 International character set (includes ASCII characters). (Optional character sets available.) * Parallel interface * Serial interface (RS-232 or TTL) * Wide viewing angle (150) * Rugged design/slim profile * Flicker free refresh, high speed data input * High brightness The APD-256M025A-1 plasma display module consists of a multiplexed DC plasma display, driver circuitry and a microprocessor-based controller board. Vishay Dale's(R) patented open construction display technology assures a stable, flicker free screen. The parallel interface is a basic 8 bit parallel ASCII interface with handshaking and some dedicated control lines. The ASCII data and command data are presented to the unit in positive logic convention. Data is entered by first placing the data to be strobed into the display on the data bus. A negative going strobe of 200 nS on the WRITE pin will notify the controller that data is available. The controller will respond with a positive going BUSY signal that will remain a logic one until the controller is ready. The system microprocessor handles input data rates up to 10 kHz. Data format for serial interface is 1 start bit, 8 data bits and 1 stop bit. Baud rates from 150 to 19,200 can be selected. The serial interface can be programmed for RS-232 or TTL voltage levels. The display can operate with no handshaking at the highest baud rate, as it has a 20 character buffer to capture data while doing long commands. However, it is important to note instruction execution times to prevent loss of data in the event that several long commands are placed in sequence. The EPROM based character generator is programmed with an international character set which includes the standard ASCII characters. It can be factory or user programmed for other character sets. The logic input is one HCT type input with a 4.75 kilohm to + 5 VDC. The output is driven from a 74LS06 open collector gate and is not internally pulled up.
OPTICAL SPECIFICATIONS
Viewing Area: 7.00" [177.80mm] W x 3.05" [77.47mm] H. Number of Characters: 256. Character Size: 0.146" [3.71mm] W x 0.252" [6.40mm] H. Luminance: 70 foot lamberts.
DIMENSIONS in inches [millimeteres]
9.45 [240.03] 9.06 [230.12] .630 [16.0] 4.33 [109.98] 4.72 [119.89] .200 [5.08] .200 [5.08]
3.05 [77.47]
STANDARD ELECTRICAL SPECIFICATIONS
7.00 [177.80]
1.02 [25.91] .500 [12.70]
MIN. Logic Supply Voltage Logic Supply Current Panel Supply Voltage Panel Supply Current Logic One Voltage Logic Zero Voltage Logic Zero Input Current + 4.75 -- + 11.4 -- 2.4 -- --
TYP. + 5.0 0.45 12.0 0.6 -- -- --
MAX. + 5.25 -- 12.6 1.0 5.5 0.8 - 0.4
UNITS V A V A V V mA
6-32 Threaded Standoff 4 Places
Pin #1 7.94 [201.68] J1 Mating Connector AMP 1-480702-0 (18-24 AWG Pin) 350689-1 J2 Mating Connector AMP 746285-4 2.28 [57.91] Max.
ORDERING INFORMATION
DESCRIPTION PART NUMBER Display, Drive Electronics and Controller ................................................................................................................... APD-256M025A-1 Parallel Data Connector Kit .................................................................................................................................................... 280105-04 Power/Serial Data Connector Kit ............................................................................................................................................ 280108-06 Non-Glare Filter (amber circular polarized) - other filters available, contact factory .............................................................. 280109-14 www.vishay.com 2 Document Number: 37021 Revision 08-Nov-00
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1

▲Up To Search▲

Price & Availability of 280105-04

	To Download 280105-04 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .